How to verify DNP DTS minus reading is correct or wrong?
DNP offer 2 sensor reading as below
l Die CPU: The temperature sensor reading of CPU Die
l DTS CPU: The margin between Die CPU and SPEC.
For example , CPU model is 6438N ,the DTS MAX is 96
DTS CPU = Die CPU - DTX max
-52.39=43.56 - 96
Related Articles
Why D50DNP have no M.2 sensor show up when installed MICRON 5400
Fail symptom :BMC has no M.2 sensor show up , but M.2 device MICRON5400 (MTFDDAV480TGA) can be found in BMC storage Information menu BMC storage information: No M.2 sensor in sensor menu Root cause: Microm 5400 M.2 is SATA device which do not support ...Does DNP support Intel TME ?
DNP support Intel TME and need to enable BIOS setting as below picture. TME (Total Memory Encryption) function default is disable. About Intel TME feature , please refer Intel white paper. ...DNP EMR pretest BIOS download link
Intel released pretest BIOS on INTEL RDC Please visit INTEL RDC and find content id 792400 https://www.intel.com/content/www/us/en/resources-documentation/developer.html#gs.1lpv5kWhat's the suggest coolant type for DNP liquid-cooled system
As Intel suggestion , the coolant type is “Recochem OAT PG25” MiTAC Server D50DNP Family Technical Product Specification Page 99 ...Why TNP / DNP all nodes BMC port assigned IP when plug in network cable in 1 node only
Symptom: Installed networking cable in 1 node only ,but others nodes BMC assigned IP as well. Solution : Please check system rear side if installed EMP module . As below diagram , EMP module H/W design serial connect all nodes BMC port , so all nodes ...