D50DNP report SMBUS link error during ststem boot up.
Intel errara mentioned it's known issue and can be ignored due to no function impact.
Related Articles
Why D50DNP BMC report PCIe Correctable Link Speed Changed?
From BMC warning information , the device is related to M.2 device As DNP TPS ,DNP support PCIe x4 Gen3 m.2 device , BMC would report Link speed change if installed Gen4 M.2 device. TPS Section 8.1Intel Report / Web Ticket Portal Guide
For issue submission, please provide the following information attached/included to the case: (1) Issue Description <be as descriptive as possible, e.g. provide replication steps, whether new or existing installation, etc..> (2) Server Serial Number ...Network Link User Manual on Web BMC
Network Link User Manual on Web BMC 1. Function Description: This function is used to configure the Link Speed and Duplex Mode of the server’s network interfaces With Auto Negotiation, the device automatically selects the optimal mode. If disabled, ...Step-by-Step Guide: Enabling TPM 2.0 and Installing Windows 11 Pro on Mitac system
Step-by-Step Guide: Enabling TPM 2.0 and Installing Windows 11 Pro on system In this guide we will show you how to install win 11 pro on Mitac system with tpm2.0 installed on the mb(motherboard) the board used is the Mitac S5642AGM3NRE-2T with ...DNP EMR pretest BIOS download link
Intel released pretest BIOS on INTEL RDC Please visit INTEL RDC and find content id 792400 https://www.intel.com/content/www/us/en/resources-documentation/developer.html#gs.1lpv5k