How to check and enable /disable D50TNP power supply code redundancy

How to check and enable /disable D50TNP power supply code redundancy

Please use Syscfg utility or IPMI tool raw command to check and enable/disable PSU CR feature.

IPMI command : ipmitool raw 0x30 0x2e 0x01
Return value :00 (disable)
                        01 (enable)

    • Related Articles

    • Check customer RMA issues

      Check customer RMA issues

    • All PSUs MUST have AC Cord Plug on G4520G6

      The G4520G6 power supply system outputs 9,600 watts with a 3+1 redundancy configuration. All PSUs MUST have AC cord plug to ensure proper functionality. If a power supply modules is installed but not connected to an AC power source, it will trigger a ...

    • Power cable for NVIDIA H100 GPU on FT65T-B8050 and B5652

      The power cable for NVIDIA H100 GPU, MiTAC P/N:422T61300019. * Pine Definition Power cable for NVIDIA H100 GPU

    • HOWTO CHECK TN85-B8261 AMBIENT TEMPERATURE

      To check ambient temperature of TN85-B8261, you can check the SYS_AIR_INLET sensor by issuing 'ipmitool sdr elist | grep -i sys_air_inlet' or by checking BMC Web GUI Sensor Reading 1. Reading SYS_AIR_INLET sensor via ipmitool sdr elist 2. Reading ...

    • Mitac DSG sytem warranty check.

      Customers can easily check the warranty information of Mitac sold systems using the link provided below. Customers can use either the system's serial number (SN) or the serial number of individual components. ...