How to check which power supply is not receiving power from the debug log of the Intel M50CYP2UR208

How to check which power supply is not receiving power from the debug log of the Intel M50CYP2UR208


Check under General BMC Sensor Readings, check for the entry RD:0000 SN:PS1 Input Power to identify power issues.

RD:0000 is currently reading 0 watts.

Below is an example

READING - S#:54 RD:0000 SN:PS1 Input Power


    • Related Articles

    • How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power?

      Question How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power? Answer You can see the PSU fan run speed, duty, AC-in voltage, in the BMC sensor. Open a browser and log in to the BMC web console, Navigate to “Hardware ...

    • How to check and enable /disable D50TNP power supply code redundancy

      Please use Syscfg utility or IPMI tool raw command to check and enable/disable PSU CR feature. https://www.intel.com/content/www/us/en/support/articles/000025905/server-products/server-boards.html IPMI command : ipmitool raw 0x30 0x2e 0x01 Return ...

    • How to use System Debug Log Advisor

      1 . Generate the system debug log files using the link below. https://servertools.mitacmct.com/support/bmc-debug-log 2. Upload the system debug log files using the link below. https://servertools.mitacmct.com/sdla Below is an example.

    • Issues with decrypting a debug log.

      Description: The system was unable to decrypt the debug log. Below is an example. Resolution: The system's BMC needs to be updated to the latest version. WarningMake sure the system configuration is backed up.

    • Intel Report / Web Ticket Portal Guide

      For issue submission, please provide the following information attached/included to the case: (1) Issue Description <be as descriptive as possible, e.g. provide replication steps, whether new or existing installation, etc..> (2) Server Serial Number ...