How to disable R2520 redfish
Please boot into BIOS and change BIOS setting
Advanced >
Redfish Host Interface Settings -> Redfish from “Enabled” to “Disabled”
Related Articles
How to check and enable /disable D50TNP power supply code redundancy
Please use Syscfg utility or IPMI tool raw command to check and enable/disable PSU CR feature. https://www.intel.com/content/www/us/en/support/articles/000025905/server-products/server-boards.html IPMI command : ipmitool raw 0x30 0x2e 0x01 Return ...Mitac EGS Platform Get BSOD Issue while installing WS2019 OS
Mitac EGS Platform Get BSOD Issue while installing WS2019 OSIpmi command "ipmitool sel list " doesn't show sel log on D50DNP system.
Fail symptom : No message print after perform "ipmi sel list " , only show "sel has no entries" Root cuase : OpenBMC does not have the static SDR design like legacy BMC, so when adding a SEL entry via a raw command, the BMC will attempt to map it ...Does DNP support Intel TME ?
DNP support Intel TME and need to enable BIOS setting as below picture. TME (Total Memory Encryption) function default is disable. About Intel TME feature , please refer Intel white paper. ...S8016AGM2NR MB Front Panel Header definition
S8016AGM2NR MB Front Panel Header definition 1. Check the Front Panel Header on S8016AGM2NR User Guide V1.0c. MiTAC S8016 S8016AGM2NR Documentations 2. About the S8016AGM2NR Front Panel Header: Pin 1-3 is HDD LED (Pin1 is LED+ /Pin3 is LED-) Pin 2-4 ...