How to test the G8825Z5 computer node only

GPU Module Disable Instructions for Node Testing
When testing the computer node only, please set jumper J2 to disable the GPU module.
For detailed instructions, refer to page 86 of the service manual.

• Related Articles

• How to run the “AMD GPU Stress test” on Ubuntu24.04

  How to run the “AMD GPU Stress test” on Ubuntu24.04 Test Configuration Product Name: B8261 / 8050 /8030 CPU: AMD EPYC 9174F *2 / AMD EPYC 9534 / AMD EPYC 7713P DIMM: DDR5 6400 32GB*12 / DDR5 4800 32GB*8 / DDR4 3200 32GB*8 Graphics: AMD R9700 AI Pro*2 ...

• Why TNP / DNP all nodes BMC port assigned IP when plug in network cable in 1 node only

  Symptom: Installed networking cable in 1 node only ,but others nodes BMC assigned IP as well. Solution : Please check system rear side if installed EMP module . As below diagram , EMP module H/W design serial connect all nodes BMC port , so all nodes ...

• D50DNP report SMBUS link error during ststem boot up.

  Intel errara mentioned it's known issue and can be ignored due to no function impact.

• ovirt4.4 Installation and Deployment

  ovirt4.4 Installation and Deployment

• L9 Naming Decoder

  <for internal agent only> L9 Naming Decoder from Intel CPE