How to use ipmi command to set next boot as PXE boot

If customer needs to use ipmi command to set system next boot as PXE boot. Then customer can use below command to let their system boot to PXE mode at next power-on.

ipmi command:

#ipmitool chassis bootdev pxe (for Legacy mode)

#ipmitool chassis bootdev pxe options=efiboot (For UEFI mode)

Check current PXE mode

#ipmitool chassis bootparam get 5

Legacy mode

UEFI mode

Bootdev:

• Related Articles

• How to use IPMITOOL to modify BMC FRU file

  How to use IPMITOOL to modify BMC FRU file

• Ipmi command "ipmitool sel list " doesn't show sel log on D50DNP system.

  Fail symptom : No message print after perform "ipmi sel list " , only show "sel has no entries" Root cuase : OpenBMC does not have the static SDR design like legacy BMC, so when adding a SEL entry via a raw command, the BMC will attempt to map it ...

• HOWTO USE FRUEDIT ON UEFI-Built-in-Shell

  HOWTO USE FRUEDIT ON UEFI-Built-in-Shell

• Step-by-Step Guide: Enabling TPM 2.0 and Installing Windows 11 Pro on Mitac system

  Step-by-Step Guide: Enabling TPM 2.0 and Installing Windows 11 Pro on system In this guide we will show you how to install win 11 pro on Mitac system with tpm2.0 installed on the mb(motherboard) the board used is the Mitac S5642AGM3NRE-2T with ...

• How to use IPMI commands to get/control system status on R1520G6/R2520G6

  Question How to use IPMI commands to get/control system status on R1520G6/R2520G6 Answer This document explains how to use IPMI commands via two methods to get/control system status. IPMI (Local): Executed locally on R1520G6/R2520G6 Linux O/S. IPMI ...