HOWTO USE FRUEDIT ON UEFI-Built-in-Shell

• Related Articles

• How to use ipmi command to set next boot as PXE boot

  If customer needs to use ipmi command to set system next boot as PXE boot. Then customer can use below command to let their system boot to PXE mode at next power-on. ipmi command: #ipmitool chassis bootdev pxe (for Legacy mode) #ipmitool chassis ...

• HOWTO SEARCH VMWARE CERTIFIED PRODUCTS FROM MITAC WEBSITE

  Please click the attached file to check on how-to search Mitac website for vmware certified products

• How to use IPMITOOL to modify BMC FRU file

  How to use IPMITOOL to modify BMC FRU file

• How to identify whether B8056 can use Gen5 U.2 NVME SSD.

  Question: How to identify whether B8056 can use Gen5 U.2 NVME SSD. Answer: User wishes to use GEN5 U.2 NVME SSD must use B8056T70AE26HR-2T-2HE-TU product model as its HDD backplane support GEN5 U.2 NVME SSD. This document explains how to identify ...

• How do I use the IPMI command to check or modify the BMC SKU ID?

  Question: How do I use the IPMI command to check or modify the BMC SKU ID? Answer: We can use the IPMI command to check or modify the MiTAC BMC firmware SKU ID to match the current system SKU model. Example: Change the S5652 BMC firmware SKU ID from ...