Issues with decrypting a debug log.

Description:

The system was unable to decrypt the debug log. Below is an example.

Resolution:

The system's BMC needs to be updated to the latest version.

Warning

Make sure the system configuration is backed up.

• Related Articles

• How to use System Debug Log Advisor

  1 . Generate the system debug log files using the link below. https://servertools.mitacmct.com/support/bmc-debug-log 2. Upload the system debug log files using the link below. https://servertools.mitacmct.com/sdla Below is an example.

• Check customer RMA issues

  Check customer RMA issues

• How to check which power supply is not receiving power from the debug log of the Intel M50CYP2UR208

  Check under General BMC Sensor Readings, check for the entry RD:0000 SN:PS1 Input Power to identify power issues. RD:0000 is currently reading 0 watts. Below is an example READING - S#:54 RD:0000 SN:PS1 Input Power

• Ipmi command "ipmitool sel list " doesn't show sel log on D50DNP system.

  Fail symptom : No message print after perform "ipmi sel list " , only show "sel has no entries" Root cuase : OpenBMC does not have the static SDR design like legacy BMC, so when adding a SEL entry via a raw command, the BMC will attempt to map it ...

• Intel Server Board S2600WF_Memory_Reseat or Replacement_Guide

  Memory(DIMM) Re-seat / Replacement Instructions for Intel® Server Board S2600WF-based System Example Symptoms: Alert notification through BMC Web Console Purlple Screen Of Death(PSOD) Note: If There is no catastrophic issue (PSOD, unexpected ...