Need to setup “Performance” mode in Bios setup menu when using H100/L40/L40s GPU card on M50FCP2UR208 and M50FCP2UR216.
If the end user
installs H100/L40/L40s GPU card on M50FCP2UR208 and M50FCP2UR216,
the end user
needs to install FCPGPGPU kit and manually switch fan profile to “Performance”
mode in BIOS setup utility.
BIOS setup utility:
Advanced-->System Acoustic and Performance
Configuration-->Set Fan Profile-->set to be [Performance] mode.
FCPGPGPU kit:
Related Articles
Issue with H100 / L40 / L40s not detected in the system
If the Nvidia H100 / L40 / L40s cards are not detected in your system please check the power connection to the power supply has the correct sense pins to card. Table 7 lists the power level options identifiable by the PCIe 16-pin power connecter per ...B7129 BIOS Relevant settings for serial port mapping
B7129 BIOS Relevant settings for serial port mappingovirt4.4 Installation and Deployment
ovirt4.4 Installation and DeploymentHow to install Broadcom 9560-16i RAID adapter in MiTAC B8261T85E8HR-2T-N and locate U.2 NVMe
How to install Broadcom 9560-16i RAID adapter in MiTAC B8261T85E8HR-2T-N and locate U.2 NVMeRecommend Mini-DP to VGA or HDMI Adapter Models for R2520G6 and R1520G6
Recommend Mini-DP to VGA or HDMI Adapter Models for R2520G6 and R1520G6 In the R2520G6, R1520G6 servers, it should use active mini-DP to VGA or HDMI adapter for working normally. The recommended mini-DP to VGA or HDMI adapter list as follows: ...