Network Link User Manual on Web BMC
1.
Function Description:
This
function is used to configure the Link Speed and Duplex Mode of
the server’s network interfaces
With Auto
Negotiation, the device automatically selects the optimal mode. If disabled,
manual configuration is required.
2.
Parameter Description:
LAN
Interface
: Select
the required network interface from the list to which the Link speed and duplex
mode to be configured.
Auto
Negotiation
: This
option enables the device to perform automatic configuration to achieve the
best possible mode of operation (speed and duplex) over a link.
Link
Speed
: It lists
all the supported capabilities of the network interface. It can be 10/100/1000
Mbps.
Note: The
link speed of 1000 Mbps is not applicable, when Auto Negotiation is OFF. Duplex
Mode: Duplex Mode could be either Half Duplex or Full Duplex.
Save
: To save the settings.
3.
Procedure:
a.
select
Settings → Network Link, The system will display the Network Link
Configuration Page
.
b.
Select
the LAN Interface
c.
Select
either Enable or Disable for Auto Negotiation.
Note: If disabled, you must
manually configure Link Speed and Duplex Mode.
d.
Select
the Link Speed from the drop-down list.
e.
Select
the Duplex Mode:
- Full Duplex
- Half Duplex
f.
Click
Save to save the configuration.