New generation MB Front panel pin header cable
When customer ask for front panel cable for new generation like ( S7136/S8040 etc .
please refer to cable part number 422B00700007.
Related Articles
S8016AGM2NR MB Front Panel Header definition
S8016AGM2NR MB Front Panel Header definition 1. Check the Front Panel Header on S8016AGM2NR User Guide V1.0c. MiTAC S8016 S8016AGM2NR Documentations 2. About the S8016AGM2NR Front Panel Header: Pin 1-3 is HDD LED (Pin1 is LED+ /Pin3 is LED-) Pin 2-4 ...MiTAC OTS Front Panel Conversion Cable
MiTAC OTS Front Panel Conversion Cable In the S8040, S7130, S7136… motherboards, the onboard connector FPIO_2 (or FPIO_1, as defined by the motherboard) is the front panel header. It is a 1.0mm 2x12 pin header. In the chassis, the front panel header ...WHEN END USER ASK WHERE TO purchase the front panel cable (Part #422B00700007) for a new-generation motherboard
When an end user asks where to purchase the front panel cable for the new-generation motherboard (Part #422B00700007), please refer them to the eBay link provided below. https://www.ebay.com/itm/197740999859Why need to install 4 pin 12V power cable to S7130 J6 4 pin connector
Why need to install 4 pin 12V power cable to S7130 J6 4 pin connectorWhy TNP / DNP all nodes BMC port assigned IP when plug in network cable in 1 node only
Symptom: Installed networking cable in 1 node only ,but others nodes BMC assigned IP as well. Solution : Please check system rear side if installed EMP module . As below diagram , EMP module H/W design serial connect all nodes BMC port , so all nodes ...