R1520G6 R2520G6 System Fan Keeps Running in the ACPI-S5 State

• Related Articles

• M50FCP System Fan-4 Keep Running in the ACPI-S5 State

  M50FCP System Fan Keeps Running in the ACPI-S5 State (DC-OFF) In the M50FCP server system configured with dual processors, dual PSUs, and an OCP Ethernet card, it is expected behavior for System Fan-4 to keep running even when the system is in the ...

• How to adjust S8016AGM2NR system FAN speed?

  Question: How to adjust S8016AGM2NR system FAN speed? Answer: S8016AGM2NR System FAN speed can be adjusted by below ipmi command. 1. ipmitool raw 0x2e 0x44 0xfd 0x19 0x00 0x00 0x01 50 (set PWM-0, duty-50, CPU_FAN) 2. ipmitool raw 0x2e 0x44 0xfd 0x19 ...

• R2520/1520 Fan Speed Control

  Please use PWMTach Tool for fan speed control

• How to adjust system fan speed on S8056?

  We can use ipmi command to Set/Get system fan speed in S8056 as below. Set Fan speed 1. ipmitool raw 0x2e 0x44 0xfd 0x19 0x00 0x00 0x01 50 (set PWM 0,CPU_FAN, e.g.,duty is 50) 2. ipmitool raw 0x2e 0x44 0xfd 0x19 0x00 0x01 0x01 50 (set PWM 1, ...

• How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power?

  Question How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power? Answer You can see the PSU fan run speed, duty, AC-in voltage, in the BMC sensor. Open a browser and log in to the BMC web console, Navigate to “Hardware ...