R2520/1520 Fan Speed Control
Please use PWMTach Tool for fan speed control
Related Articles
How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power?
Question How to check the PSU Fan Speed/PSU Fan Duty/PSU Input Voltage/PSU Output Power? Answer You can see the PSU fan run speed, duty, AC-in voltage, in the BMC sensor. Open a browser and log in to the BMC web console, Navigate to “Hardware ...
Why D50DNP BMC report PCIe Correctable Link Speed Changed?
From BMC warning information , the device is related to M.2 device As DNP TPS ,DNP support PCIe x4 Gen3 m.2 device , BMC would report Link speed change if installed Gen4 M.2 device. TPS Section 8.1
M50FCP System Fan-4 Keep Running in the ACPI-S5 State
M50FCP System Fan Keeps Running in the ACPI-S5 State (DC-OFF) In the M50FCP server system configured with dual processors, dual PSUs, and an OCP Ethernet card, it is expected behavior for System Fan-4 to keep running even when the system is in the ...
R1520G6 R2520G6 System Fan Keeps Running in the ACPI-S5 State
R1520G6 / R2520G6 System Fan Keeps Running in the ACPI-S5 State (DC-OFF).
Why is the PCIe link speed on the NVIDIA RTX PRO 6000 Blackwell Max-Q, 4500 GPU card downgraded to Gen1, even though the connection supports Gen5?
Question Why is the PCIe link speed on the NVIDIA RTX PRO 6000 Blackwell Max-Q, 4500 GPU card downgraded to Gen1, even though the connection supports Gen5? Answer Because installing the latest driver has put the GPU in lower performance mode. The GPU ...