Regarding S8040GM4NE-2T hardware fault LEDs
Regarding S8040GM4NE-2T hardware fault LEDs
The customer reported that on the S8040GM4NE-2T, a pair of hardware fault LEDs is blinking
Resolution:
Update the BIOS and BMC to the latest versions, and clear the logs.
Related Articles
How to download The S5565 Bios that support Alder Lake-S DDR4/Raptor Lake-S DDR4/Bartlett Lake-S DDR4
https://www.mitaccomputing.com/en/downloads/Motherboards/S5565_S5565AG2NR#dw BIOS5565010107.ROM - Date : 08/05/2025 - Checksum32 : 0xE66A5905(CRC32) - Banner : TYAN S5565AG2NR V1.07 - Codebase : 5.32_1AZJN_RC0C.00.FB.20(6073.02)_047 - CPU : Alder ...Regarding the Zoho user agent that shows a red dot
Regarding the Zoho user agent that shows a red dot. Resolution: 1. Refresh the browser because Zoho might be idle 2. Clear the browser cache or use a different browser 3. Add the Zoho URL to the Performance settings (Always keep these sites active)Regarding the BIOS/Redfish behavior of the S8016 motherboard
Regarding the BIOS/Redfish behavior of the S8016 motherboard. After updating the BIOS from version 3.06 to 3.07, the issue has been resolved. Please see the information below. When the PK is deleted through Redfish, the BIOS System Mode changes from ...Regarding the 8-pin power connector on the B8056T70AE26HR-2T-HE-TU Power Distribution Board,
Regarding the 8-pin power connector on the B8056T70AE26HR-2T-HE-TU Power Distribution Board. According to Taiwan team's original design, the 8-pin connector is reserved for GPU support.Regarding the B8261T85E8HR-2T-N with one CPU installed, the server will not power on after the motherboard was replaced.
Regarding the B8261T85E8HR-2T-N with one CPU installed, the server will not power on after the motherboard was replaced. Below is the photo that shows the CPU is installed in socket 1 instead of socket 0. Resolution: The CPU needs to be installed in ...